Electromagnetism, science of charge and of the forces and fields associated with charge. Electricity and magnetism are two aspects of electromagnetism.
Electricity and magnetism were long thought to be separate forces. It was not until the 19th century that they were finally treated as interrelated phenomena. In 1905 Albert Einstein’s special theory of relativity established beyond a doubt that both are aspects of one common phenomenon. At a practical level, however, electric and magnetic forces behave quite differently and are described by different equations. Electric forces are produced by electric charges either at rest or in motion. Magnetic forces, on the other hand, are produced only by moving charges and act solely on charges in motion.
Electric phenomena occur even in neutral matter because the forces act on the individual charged constituents. The electric force in particular is responsible for most of the physical and chemical properties of atoms and molecules. It is enormously strong compared with gravity. For example, the absence of only one electron out of every billion molecules in two 70-kilogram (154-pound) persons standing two metres (two yards) apart would repel them with a 30,000-ton force. On a more familiar scale, electric phenomena are responsible for the lightning and thunder accompanying certain storms.
Electric and magnetic forces can be detected in regions called electric and magnetic fields. These fields are fundamental in nature and can exist in space far from the charge or current that generated them. Remarkably, electric fields can produce magnetic fields and vice versa, independent of any external charge. A changing magnetic field produces an electric field, as the English physicist Michael Faraday discovered in work that forms the basis of electric power generation. Conversely, a changing electric field produces a magnetic field, as the Scottish physicist James Clerk Maxwell deduced. The mathematical equations formulated by Maxwell incorporated light and wave phenomena into electromagnetism. He showed that electric and magnetic fields travel together through space as waves of electromagnetic radiation, with the changing fields mutually sustaining each other. Examples of electromagnetic waves traveling through space independent of matter are radio and television waves, microwaves, infrared rays, visible light, ultraviolet light, X-rays, and gamma rays. All of these waves travel at the same speed—namely, the velocity of light (roughly 300,000 kilometres, or 186,000 miles, per second). They differ from each other only in the frequency at which their electric and magnetic fields oscillate.
Maxwell’s equations still provide a complete and elegant description of electromagnetism down to, but not including, the subatomic scale. The interpretation of his work, however, was broadened in the 20th century. Einstein’s special relativity theory merged electric and magnetic fields into one common field and limited the velocity of all matter to the velocity of electromagnetic radiation. During the late 1960s, physicists discovered that other forces in nature have fields with a mathematical structure similar to that of the electromagnetic field. These other forces are the strong force, responsible for the energy released in nuclear fusion, and the weak force, observed in the radioactive decay of unstable atomic nuclei. In particular, the weak and electromagnetic forces have been combined into a common force called the electroweak force. The goal of many physicists to unite all of the fundamental forces, including gravity, into one grand unified theory has not been attained to date.
An important aspect of electromagnetism is the science of electricity, which is concerned with the behaviour of aggregates of charge, including the distribution of charge within matter and the motion of charge from place to place. Different types of materials are classified as either conductors or insulators on the basis of whether charges can move freely through their constituent matter. Electric current is the measure of the flow of charges; the laws governing currents in matter are important in technology, particularly in the production, distribution, and control of energy.
The concept of voltage, like those of charge and current, is fundamental to the science of electricity. Voltage is a measure of the propensity of charge to flow from one place to another; positive charges generally tend to move from a region of high voltage to a region of lower voltage. A common problem in electricity is determining the relationship between voltage and current or charge in a given physical situation.
This article seeks to provide a qualitative understanding of electromagnetism as well as a quantitative appreciation for the magnitudes associated with electromagnetic phenomena.
Everyday modern life is pervaded by electromagnetic phenomena. When a lightbulb is switched on, a current flows through a thin filament in the bulb, and the current heats the filament to such a high temperature that it glows, illuminating its surroundings. Electric clocks and connections link simple devices of this kind into complex systems such as traffic lights that are timed and synchronized with the speed of vehicular flow. Radio and television sets receive information carried by electromagnetic waves traveling through space at the speed of light. To start an automobile, currents in an electric starter motor generate magnetic fields that rotate the motor shaft and drive engine pistons to compress an explosive mixture of gasoline and air; the spark initiating the combustion is an electric discharge, which makes up a momentary current flow.
Many of these devices and phenomena are complex, but they derive from the same fundamental laws of electromagnetism. One of the most important of these is Coulomb’s law, which describes the electric force between charged objects. Formulated by the 18th-century French physicist Charles-Augustin de Coulomb, it is analogous to Newton’s law for the gravitational force. Both gravitational and electric forces decrease with the square of the distance between the objects, and both forces act along a line between them. In Coulomb’s law, however, the magnitude and sign of the electric force are determined by the charge, rather than the mass, of an object. Thus, charge determines how electromagnetism influences the motion of charged objects. (Charge is a basic property of matter. Every constituent of matter has an electric charge with a value that can be positive, negative, or zero. For example, electrons are negatively charged, and atomic nuclei are positively charged. Most bulk matter has an equal amount of positive and negative charge and thus has zero net charge.)
According to Coulomb, the electric force for charges at rest has the following properties:
(1) Like charges repel each other, and unlike charges attract. Thus, two negative charges repel one another, while a positive charge attracts a negative charge.
(2) The attraction or repulsion acts along the line between the two charges.
(3) The size of the force varies inversely as the square of the distance between the two charges. Therefore, if the distance between the two charges is doubled, the attraction or repulsion becomes weaker, decreasing to one-fourth of the original value. If the charges come 10 times closer, the size of the force increases by a factor of 100.
(4) The size of the force is proportional to the value of each charge. The unit used to measure charge is the coulomb (C). If there were two positive charges, one of 0.1 coulomb and the second of 0.2 coulomb, they would repel each other with a force that depends on the product 0.2 × 0.1. If each of the charges were reduced by one-half, the repulsion would be reduced to one-quarter of its former value.
Static cling is a practical example of the Coulomb force. In static cling, garments made of synthetic material collect a charge, especially in dry winter air. A plastic or rubber comb passed quickly through hair also becomes charged and will pick up bits of paper. The synthetic fabric and the comb are insulators; charge on these objects cannot move easily from one part of the object to another. Similarly, an office copy machine uses electric force to attract particles of ink to paper.
Principle of charge conservation
Like Coulomb’s law, the principle of charge conservation is a fundamental law of nature. According to this principle, the charge of an isolated system cannot change. If an additional positively charged particle appears within a system, a particle with a negative charge of the same magnitude will be created at the same time; thus, the principle of conservation of charge is maintained. In nature, a pair of oppositely charged particles is created when high-energy radiation interacts with matter; an electron and a positron are created in a process known as pair production.
The smallest subdivision of the amount of charge that a particle can have is the charge of one proton, +1.602 × 10−19coulomb. The electron has a charge of the same magnitude but opposite sign—i.e., −1.602 × 10−19 coulomb. An ordinary flashlight battery delivers a current that provides a total charge flow of approximately 5,000 coulomb, which corresponds to more than 1022 electrons, before it is exhausted.
Electric current is a measure of the flow of charge, as, for example, charge flowing through a wire. The size of the current is measured in amperes and symbolized by i. An ampere of current represents the passage of one coulomb of charge per second, or 6.2 billion billion electrons (6.2 × 1018 electrons) per second. A current is positive when it is in the direction of the flow of positive charges; its direction is opposite to the flow of negative charges.
Electric fields and forces
The force and conservation laws are only two aspects of electromagnetism, however. Electric and magnetic forces are caused by electromagnetic fields. The term field denotes a property of space, so that the field quantity has a numerical value at each point of space. These values may also vary with time. The value of the electric or magnetic field is a vector—i.e., a quantity having both magnitude and direction. The value of the electric field at a point in space, for example, equals the force that would be exerted on a unit charge at that position in space.
Every charged object sets up an electric field in the surrounding space. A second charge “feels” the presence of this field. The second charge is either attracted toward the initial charge or repelled from it, depending on the signs of the charges. Of course, since the second charge also has an electric field, the first charge feels its presence and is either attracted or repelled by the second charge too.
The electric field from a charge is directed away from the charge when the charge is positive and toward the charge when it is negative. The electric field from a charge at rest is shown in Figure 1 for various locations in space. The arrows point in the direction of the electric field, and the length of the arrows indicates the strength of the field at the midpoint of the arrows.
If a positive charge were placed in the electric field, it would feel a force in the direction of the field. A negative charge would feel a force in the direction opposite the direction of the field.
In calculations, it is often more convenient to deal directly with the electric field than with the charges. Frequently, more is known about the field than about the distribution of charges in space. For example, the distribution of charges in conductors is generally unknown because the charges move freely within the conductor. In static situations, however, the electric field in a conductor in equilibrium has a definite value, zero, because any force on the charges inside the conductor redistributes them until the field vanishes. The unit of electric field is newtons per coulomb, or volts per metre.
The electric potential is another useful field. It provides an alternative to the electric field in electrostatics problems. The potential is easier to use, however, because it is a single number, a scalar, instead of a vector. The difference in potential between two places measures the degree to which charges are influenced to move from one place to another. If the potential is the same at two places (i.e., if the places have the same voltage), charges will not be influenced to move from one place to the other. The potential on an object or at some point in space is measured in volts; it equals the electrostatic energy that a unit charge would have at that position. In a typical 12-volt car battery, the battery terminal that is marked with a + sign is at a potential 12 volts greater than the potential of the terminal marked with the − sign. When a wire, such as the filament of a car headlight, is connected between the + and the − terminals of the battery, charges move through the filament as an electric current and heat the filament, and the hot filament radiates light.
Magnetic fields and forces
The magnetic force influences only those charges that are already in motion. It is transmitted by the magnetic field. Both magnetic fields and magnetic forces are more complicated than electric fields and electric forces. The magnetic field does not point along the direction of the source of the field; instead, it points in a perpendicular direction. In addition, the magnetic force acts in a direction that is perpendicular to the direction of the field. In comparison, both the electric force and the electric field point directly toward or away from the charge.
The present discussion will deal with simple situations in which the magnetic field is produced by a current of charge in a wire. Certain materials, such as copper, silver, and aluminum, are conductors that allow charge to flow freely from place to place. If an external influence establishes a current in a conductor, the current generates a magnetic field. For a long straight wire, the magnetic field has a direction that encircles the wire on a plane perpendicular to the wire. The strength of the magnetic field decreases with distance from the wire. The arrows in Figure 2 represent the size and direction of the magnetic field for a current moving in the direction indicated. Figure 2A shows an end view with the current coming toward the reader, while Figure 2B provides a three-dimensional view of the magnetic field at one position along the wire.
In subsequent figures, continuous lines will be used to represent the direction of electric and magnetic fields. These lines emphasize the important fact that electric fields begin on positive charges and end on negative charges, while magnetic fields do not have beginnings or ends and close on themselves. The magnetic field shown in Figure 2 is unusually simple. Highly complex and useful magnetic fields can be generated by the proper choice of conductors to carry electric currents. Under development are thermonuclear fusion reactors for obtaining energy from the fusion of light nuclei in the form of very hot plasmas of hydrogenisotopes. The plasmas have to be confined by magnetic fields (dubbed “magnetic bottles”) as no material container can withstand such high temperatures. Charged particles are also confined by magnetic fields in nature. Large numbers of charged particles, mostly protons and electrons, are trapped in huge bands around Earth by its magnetic field. These bands are known as the Van Allen radiation belts. Disturbance of Earth’s confining magnetic field produces spectacular displays, the so-called northern lights, in which trapped charged particles are freed and crash through the atmosphere to Earth.
Interaction of a magnetic field with a charge
How does the magnetic field interact with a charged object? If the charge is at rest, there is no interaction. If the charge moves, however, it is subjected to a force, the size of which increases in direct proportion with the velocity of the charge. The force has a direction that is perpendicular both to the direction of motion of the charge and to the direction of the magnetic field. There are two possible precisely opposite directions for such a force for a given direction of motion. This apparent ambiguity is resolved by the fact that one of the two directions applies to the force on a moving positive charge while the other direction applies to the force on a moving negative charge. Figure 3 illustrates the directions of the magnetic force on positive charges and on negative charges as they move in a magnetic field that is perpendicular to the motion.
Depending on the initial orientation of the particle velocity to the magnetic field, charges having a constant speed in a uniform magnetic field will follow a circular or helical path.
Electric currents in wires are not the only source of magnetic fields. Naturally occurring minerals exhibit magnetic properties and have magnetic fields. These magnetic fields result from the motion of electrons in the atoms of the material. They also result from a property of electrons called the magnetic dipole moment, which is related to the intrinsicspin of individual electrons. In most materials, little or no field is observed outside the matter because of the random orientation of the various constituent atoms. In some materials such as iron, however, atoms within certain distances tend to become aligned in one particular direction.
Magnets have numerous applications, ranging from use as toys and paper holders on home refrigerators to essential components in electric generators and machines that can accelerate particles to speeds approaching that of light. The practical application of magnetism in technology is greatly enhanced by using iron and other ferromagnetic materials with electric currents in devices like motors. These materials amplify the magnetic field produced by the currents and thereby create more powerful fields.
While electric and magnetic effects are well separated in many phenomena and applications, they are coupled closely together when there are rapid time fluctuations. Faraday’s law of induction describes how a time-varying magnetic field produces an electric field. Important practical applications include the electric generator and transformer. In a generator, the physical motion of a magnetic field produces electricity for power. In a transformer, electric power is converted from one voltage level to another by the magnetic field of one circuit inducing an electric current in another circuit.
The existence of electromagnetic waves depends on the interaction between electric and magnetic fields. Maxwell postulated that a time-varying electric field produces a magnetic field. His theory predicted the existence of electromagnetic waves in which each time-varying field produces the other field. For example, radio waves are generated by electronic circuits known as oscillators that cause rapidly oscillating currents to flow in antennas; the rapidly varying magnetic field has an associated varying electric field. The result is the emission of radio waves into space (seeelectromagnetic radiation: Generation of electromagnetic radiation).
Many electromagnetic devices can be described by circuits consisting of conductors and other elements. These circuits may operate with a steady flow of current, as in a flashlight, or with time-varying currents. Important elements in circuits include sources of power called electromotive forces; resistors, which control the flow of current for a given voltage; capacitors, which store charge and energy temporarily; and inductors, which also store electrical energy for a limited time. Circuits with these elements can be described entirely with algebra. (For more complicated circuit elements such as transistors, seesemiconductor device and integrated circuit).
Two mathematical quantities associated with vector fields, like the electric fieldE and the magnetic fieldB, are useful for describing electromagnetic phenomena. They are the flux of such a field through a surface and the line integral of the field along a path. The flux of a field through a surface measures how much of the field penetrates through the surface; for every small section of the surface, the flux is proportional to the area of that section and depends also on the relative orientation of the section and the field. The line integral of a field along a path measures the degree to which the field is aligned with the path; for every small section of path, it is proportional to the length of that section and is also dependent on the alignment of the field with that section of path. When the field is perpendicular to the path, there is no contribution to the line integral. The fluxes of E and B through a surface and the line integrals of these fields along a path play an important role in electromagnetic theory. As examples, the flux of the electric field E through a closed surface measures the amount of charge contained within the surface; the flux of the magnetic field B through a closed surface is always zero because there are no magnetic monopoles (magnetic charges consisting of a single pole) to act as sources of the magnetic field in the way that charge is a source of the electric field.
First published in St. Petersburg in 1759, F.U.T. Aepinus's Tenuimen theoriae electricilatis el magnetismi was one of the outstanding achievements of eighteenth-century physics. Its rigorous mathematical investigation of electricity and magnetism was an important and innovative departure from the primarily qualitative and nonmathematical treatments that preceded it. P. J. Connor's translation of the original Latin edition is the first to appear in any western European language, and the introductory monograph and notes by R. W. Home provide a far more definitive account of Aepinus's life and work than has heretofore been attempted.
Originally published in 1979.
The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These paperback editions preserve the original texts of these important books while presenting them in durable paperback editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.